In our country, lithium iron phosphate lithium battery has been widely used as a positive electrode material for power lithiu
View More
Lithium iron phosphate battery, the full name of lithium battery. Lithium iron phosphate refers to the use of lithium iron ph
View More
There are many theories about the activation of lithium batteries: in order to activate the battery, the charging time must b
View More
Nowadays, smart phones consume more and more power, and most smart phones have non-removable batteries. Therefore, large-cap
View More
Nowadays, smart phones consume more and more power, and most smart phones have non-removable batteries. Therefore, large-capa
View More
This example discusses the first-generation electronic thermostat, which is based on the MCU, but requires an additional exte
View More
The power system security plan is formulated based on the above-mentioned internal component composition and possible attack
View More
What should we pay attention to before packing power? Power lithium battery is the power source of electric vehicles. In orde
View More
On the other hand, according to industry standards, the nominal capacity is generally the lowest capacity, that is, when a ba
View More
Environmental temperature: 205℃ Relative humidity: 45 ~ 85% The battery must be exhausted before the test Battery opera
View More
1. The power adapter generally uses a dark plastic shell for heat dissipation and temperature control. The internal component
View More
The increasingly developed portable electronic products have higher and higher performance requirements for the capacity and
View More
1. What is Lithium batteries are the batteries we use in mobile phones and electric cars. Chinese: Lee A more professiona
View More
We are all concerned about battery technology, battery life and safety level, but it seems to be the skill level of the batte
View More
With the increasing demand for lithium battery capacity in power equipment, people have higher and higher expectations for th
View More
As I said last week, I have removed a lot of batteries, good and bad, I don’t know whether the batteries are good or bad beca
View More
With the increasing demand for lithium battery capacity in power equipment, people have higher and higher expectations for th
View More
As I said last week, I have removed a lot of batteries, good and bad, I don’t know whether the batteries are good or bad beca
View More
In fact, lithium batteries can be divided into two types: winding and cascade. The structure of a lithium battery consi
View More
First, the smaller the depth of discharge of the battery, the shorter the distance, the longer the battery's service life
View More
When it comes to electric cars, many people now use it. Perhaps the most troublesome thing is that the electric car suddenly
View More
"Which is safer, lithium acid or lead acid? For a long time, the safety of lithium batteries and lead acid batteries has
View More
Expansion is important for two reasons. One is the manufacturer's problem. Poor production environment and outdated produ
View More
The high-temperature battery itself uses the mechanical properties of the tank shell, and is classified into 100C, 125C, 150C
View More
Five tips for charging your phoneWhen people use mobile phones, the current energy density is generally on the scale of 560-
View More
The explosive growth of China's new energy vehicle industry in recent years has made it the world's largest new energ
View More
The high-temperature battery itself uses the mechanical properties of the tank shell, and is classified into 100C, 125C, 150C
View More
Lithium batteries are expected to bring a revolution, but electric vehicles have high power density, affordable prices, and i
View More
1.1 Planning Guide for Power Lithium Battery The power lithium battery planning is to supply or supply power to the equipmen
View More
At present, the increase in the number of motor vehicles in my country may be considered as the most commonly used means of t
View More
With the progress of the times and the development of technology, people's quality of life has gradually improved,
View More
China Electric Vehicle Network News: The maintenance supervisor randomly checked the voltage and said that the battery was br
View More
At present, the increase in the number of motor vehicles in my country may be considered as the most commonly used means of t
View More
With the progress of the times and the development of technology, people's quality of life has gradually improved, so eve
View More
Electric cars are representative of our green travel, but we often only consume the battery five times. In fact, although ele
View More
Recently, a netizen revealed that he bought an independent brand pure electric car at a price of more than 80,000 yuan. After
View More
The emergence of electric vehicles has brought some inconvenience to people. I believe that many electric car friends have su
View More
As the second largest means of transportation in my country, electric vehicles are very popular in third-tier cities and firs
View More
For many people, many people drive late in their daily trips because their roads are crowded. Therefore, many people prefer t
View More
Electric cars have entered every family, because its flexible travel is very popular, so many families have reached everyone&
View More
Now, cars have gradually replaced other vehicles and become the necessary means of transportation for people to travel, becau
View More
For today's Chinese car owners, this can be said to be very difficult, because China's oil prices have already spent
View More
The internal resistance of a lithium iron phosphate battery is an important parameter to measure the difficulty of ion con
View More
The full name of lithium-iron phosphate battery should be lithium-iron phosphate battery, the name is too long, abbreviated a
View More
The internal resistance of a lithium iron phosphate battery is an important parameter to measure the difficulty of ion con
View More
The full name of lithium-iron phosphate battery should be lithium-iron phosphate battery, the name is too long, abbreviated a
View More
SMD light source refers to surface mount light-emitting diodes, which have the advantages of large light-emitting angle, hi
View More
With the rise of third-generation semiconductors represented by GaN and SiC, high-efficiency high-power LEDs as semiconductor
View More
Our country’s attitude towards LEDs is still very firm, giving a lot of support to LEDs, coupled with the competition and pro
View More
As the focus of my country's light source market, flip-chip cob is a new type of energy-saving, environmentally-friendly
View More
The solar lithium battery uses three or four series of lithium batteries. The battery pack is connected in parallel with the
View More
At the beginning of December 2012, the new industry of the power lithium battery industry department, according to the good a
View More
The internal resistance of a lithium iron phosphate battery is an important parameter to measure the difficulty of ion conduc
View More
The full name of lithium-iron phosphate battery should be lithium-iron phosphate battery, the name is too long, abbreviated a
View More
Due to the active chemical properties of lithium, there are potential safety hazards in production, use and transportation.Re
View More
The three most important steps for battery charging are: The first step: Identify the voltage. 3V, precharge, current 0.05C
View More
The charging process of lithium batteries can be divided into 4 stages: trickle charging (low-voltage pre-charging), constant
View More
Many Grida fans asked Grida’s engineers that electric cars are indeed environmentally friendly, but there is a big problem: W
View More
As the predecessor of lithium batteries, metal lithium is easy to form dendritic short circuits, which reduces the applicatio
View More
Want to know which is better, lithium battery or nickel-metal hydride battery?First of all, which aspect of the battery shoul
View More
Automotive secondary battery technology has become a hot topic. The background is that all countries in the world are impleme
View More
During the battery charging process, the reaction heat is divided into two stages. Phase 1: The important heat sources bef
View More
Automotive secondary battery technology has become a hot topic. The background is that all countries in the world are impleme
View More
Phase 1: The important heat sources before the side reaction charge are: battery chemical reaction heat, battery polarizatio
View More
1. Yes: Refers to the cathode material of the battery. Generally, the cathode material of lithium batteries is lithium lithiu
View More
People who are familiar with drones know that, for example, the price of a 10,000 mAh UAV battery Tattu is close to 1,000 un
View More
How to make this pen is now very important to maintain. In the era of rapid high-tech development, mobile phones and laptops
View More
1. Battery wear performance: The battery voltage fails and the battery capacity decreases. When the voltage at both ends is l
View More
What happens when iron phosphate expands?Lithium-ion iron phosphate battery, as a popular new energy battery, has problems fo
View More
A new coating can make light lithium metal batteries safe and durable Core tip: The new coating uniformly transmits charged
View More
Large-capacity applications are becoming more and more widespread in life. Whether it is traditional electronic products such
View More
Lithium batteries are the heart of electric vehicles, and their safety issues cannot be ignored. So how to choose a safe lith
View More
Lead-acid batteries will definitely be replaced in the future, but this does not mean that they are useless now. I don't
View More
What are the internal resistance test methods In the lithium battery industry, the accurate measurement of the internal resi
View More
In the lithium battery industry, the accurate measurement of the battery's internal resistance is carried out by special
View More
At present, the application of energy storage technology is mainly concentrated in backup grid base stations, home optical st
View More
80% of accidents are caused by short circuits, which cause frequent battery fires and explosions. The safety issue of lithium
View More
Lithium battery model name: The six numbers represent the thickness, width and height of the battery in millimeters. When any
View More
The battery cannot expand normally after long-term use. The battery swells because it takes too long to charge. This will not
View More
As we all know, it has the characteristics of small size, large capacity and long life. This battery is much better than Germ
View More
Driven by international policies and other aspects, after years of silence, China suddenly became an open emerging market.
View More
Lithium batteries are widely used in various devices, but their biggest disadvantage is the risk of overheating and fire, whi
View More
(1) Lithium battery manufacturing materials lithium battery, lithium cobalt acid battery, tri-lithium battery and lithium
View More
The low diffusion coefficient and conductivity (10-10s/cm) of pure-phase lithium titanate lead to rapid charge-discharge capa
View More
The most important component is the battery management system, which is an important link between power and electric vehicles
View More
1. The difference in abilityThe biggest difference between power and ordinary batteries is the large discharge power and high
View More
Data shows that China is the world's largest and second largest producer and exporter of lithium batteries. In addition
View More
What are the performance requirements of high-power battery electrolyte? 1. If high-active materials are used in the materi
View More
1. The transport battery should be charged and anti-collision measures should be taken to prevent the battery from being s
View More
How to use it reasonably and effectivelyAt present, the important development direction of the new energy lithium battery ind
View More
What is the actual service life of iron phosphate?At present, the standard cycle life of lithium iron phosphate batteries on
View More
What is the maximum temperature you can tolerate? The temperature range of high-temperature lithium batteries. In all electro
View More
The inconsistency of battery performance is formed during the production process and deepens during the use process. The same
View More
The components in the battery use each other and balance each other. The higher the positive nickel content, the higher the e
View More
Aluminum shell is generally an important material made of 3003 aluminum alloy, because the dynamic aluminum shell made of th
View More
Due to the maturity of battery technology and the guarantee of quality and safety, lithium batteries are favored by consumers
View More
Soon the weather will get cold, and winter is coming, so in the cold winter, the rot is more serious, so we need to keep it.
View More
At present, the lithium iron phosphate battery has a standard cycle life of about 2000 times in the market, which refers to a
View More
1. The quality of itself(1) Due to the extreme unevenness of the electrolyte, the anode plate is slightly lighter locally,
View More
The design goals of the system are: 1. It can charge and discharge four groups of 8.4V lithium batteries or 9.2V nickel-cad
View More
In addition to its advantages, whether a material has the potential for application development, it is more important that th
View More
The 18650 lithium iron phosphate battery was invented in recent years. In the development of lithium batteries, it is a kind
View More
(1) The charger is not suitable, that is, the 18650 lithium battery cannot be charged; (2) The charging current is too la
View More
Analysis of the Causes of Charge Explosion 18650 is a chemical energy product with high energy density, which is prone to ex
View More
Because of the LTC4002 constant current charging control chip, it is necessary to use a microcontroller to control it
View More
In order to enable the LTC4002 to charge the battery with a constant current greater than 8.4V and adjust the charging cur
View More
Lithium Battery and Ni-Cd Battery Charging SystemThe design goals of the system are: 1. It can charge and discharge four gr
View More
(1) The charger is not suitable, that is, the 18650 lithium battery cannot be charged; (2) The charging current is too la
View More
18650 is a chemical energy product with high energy density, which is prone to explosion during use or charging. There are
View More
Because of the LTC4002 constant current charging control chip, it is necessary to use a microcontroller to control its chargi
View More
The design goals of the system are: 1. It can charge and discharge four groups of 8.4V lithium batteries or 9.2V nickel-cad
View More
In addition to its advantages, whether a material has the potential for application development, it is more important that th
View More
The maximum electrical temperature of lithium iron phosphate can reach 350C-500C, while the maximum electrical temperature of
View More
The P-O bond in the lithium iron phosphate crystal is stable and not easy to break. Even in the case of high temperature or o
View More
(1) The charger is not suitable, that is, the 18650 lithium battery cannot be charged; (2) The charging current is too la
View More
Analysis of the Causes of Charge Explosion 18650 is a chemical energy product with high energy density, which is prone to ex
View More
In order to enable the LTC4002 to charge the battery with a constant current greater than 8.4V and adjust the charging cur
View More
The design goals of the system are: 1. It can charge and discharge four groups of 8.4V lithium batteries or 9.2V nickel-cad
View More
In addition to its advantages, whether a material has the potential for application development, it is more important that th
View More
The 18650 lithium iron phosphate battery was invented in recent years. In the development of lithium batteries, it is a kind
View More
In addition to its advantages, whether a material has the potential for application development, it is more important that th
View More
The 18650 lithium iron phosphate battery was invented in recent years. In the development of lithium batteries, it is a kind
View More
What are the advantages over drones? What is a lithium battery for airplanes? Lithium batteries for airplanes refer to lithi
View More
Can the battery life of two parallel drones be doubled? If the capacity of the battery increases with a certain amount of p
View More
During the charging process of the lithium battery, the charging voltage is higher than the specified voltage; the charging c
View More
Lithium batteries can be used in many fields, so there are many types. At present, there are three main types of lithium batt
View More
Three kinds of lithium iron phosphate batteries are betterThe technical route of new energy batteries includes two mainstream
View More
The industry's market upside is optimistic about the future The great leap forward of new energy vehicles has led to th
View More
Raw material capacity of lithium iron phosphate Market overview of lithium iron phosphate material production companies at
View More
Portable electronic devices are powered by batteries. With the rapid development of portable products, the use of various b
View More
At present, most countries and regions in the world require products involving safety, health, environmental protection an
View More
At present, it is divided into three categories, namely square bags, cylindrical bags and soft bags. Among them, square bags
View More
What are the advantages over drones? What is a lithium battery for airplanes? Lithium batteries for airplanes refer to lithi
View More
In addition to its advantages, whether a material has the potential for application development, it is more important that th
View More
The 18650 lithium iron phosphate battery was invented in recent years. In the development of lithium batteries, it is a kind
View More
In addition to its advantages, whether a material has the potential for application development, it is more important that th
View More
The 18650 lithium iron phosphate battery was invented in recent years. In the development of lithium batteries, it is a kind
View More
We all know that discarded batteries should not be thrown away randomly. They can make water and soil contaminated and can
View More
List of phone charging errors and correct charging methodsNowadays the mobile phone has become a necessary communication too
View More
1. The influence of plate area In the case of the same volume of the UPS battery shell, choose a thin plate, the number of
View More
Explanation of terms frequently used in lithium batteriesThe capacity of a lithium battery is determined by certain discharge
View More
Universal program design Battery design includes performance design and structural design, that is, voltage, capacity and l
View More
Why is this group of people not discharged from the hospital? Lithium battery pack does not discharge phenomenon: After cha
View More
Engineers at the University of California, San Diego have developed a low-temperature iron phosphate that can work at room te
View More
Electricity is generated by the oxidation of zinc and oxygen in the air. The battery can generate 1.65V, but the lower 1.4V
View More
(1) The suitable working temperature is 15~20℃ (2) The connection method of the solar cell is as follows: the positive pole
View More
How much do you know about drone repair technology? The drone is no longer the patent of the ultimate hobbyist, but the pate
View More
Common sense of electric vehicle charging and the first charging time. Electric cars seem to play a great role in our lives.
View More
The preparation of 18650 positive (negative) mud is a mixing process of positive (negative) active material, conductive agent
View More
Although the lithium battery is a maintenance-free battery, it does not require special maintenance work, but it cannot be
View More
The full name of iron phosphate is lithium iron phosphate battery, the name is too long, referred to as lithium iron phosphat
View More
First of all, about the quality of ultra-fast chargers There is no place where ultra-high-speed charging is required more t
View More
The base station uses lithium iron phosphate batteries and lead-acid batteries. It is important to consider that different d
View More
1. Regularly check the NP battery and replace the NP battery to prevent damage or leakage, such as abnormal performance, crac
View More
Lithium batteries use carbon as the negative electrode and lithium-containing compounds as the positive electrode. Lithium
View More
Maximizing the capacity/efficiency of the battery pack means setting all series batteries in the battery pack to the same SOC
View More
Attention! These four parts are essential! Lithium battery is composed of four important parts: cathode, anode, electrolyte
View More
It is a battery made of metal lithium or lithium alloy as the negative electrode material and using a non-aqueous electrolyte
View More
As we all know, it is the heart of new energy electric vehicles. The car is driven entirely by the heart. On the other hand,
View More
A simple way to think about it is, for example, a lithium battery uses up half of its power on the first day and then recharg
View More
What are the technical steps to produce lithium batteries? Today, we will discuss some steps related to lithium battery assem
View More
Lithium-ion iron phosphate batteries are in use most of the time during their service life. Generally, after a long period of
View More
1. The graphite negative electrode of lithium battery is yellow This yellow is golden yellow, which is the characteristi
View More
Definitely stated: The service life has nothing to do with the number of completed charging cycles, and has no direct relatio
View More
Introduction to assembly technology tutorialsWhat are the technical steps to produce lithium batteries? Today, we will discus
View More
It is the most commonly used battery type for household and industrial use. No matter which manufacturer, the size of the 186
View More
The battery uses elements from the earth's crust. Interestingly, plants and organisms also share these substances. We are
View More
In order to facilitate analysis and calculation, it is assumed that the following technical indicators have special circumsta
View More
Lithium batteries have polymer lithium batteries and liquid lithium batteries. How to distinguish? What are the differences a
View More
Use electric cars correctly What is the correct use of lithium batteries in electric vehicles? The following is introduced
View More
1. Under a certain negative electrode potential, the lithium ions reaching the electrode/electrolyte liquid interface will
View More
Iron phosphate is a kind of lithium battery. Currently, BYD e6, BAIC EV160, Tengshi and other electric vehicle manufacturers
View More
At the beginning of this year, some car manufacturers vowed to adopt solid-state batteries to promote the range of electric
View More
Design of universal programs General procedure for lithium battery design Battery design includes performance design and s
View More
Problems that should be paid attention to during 18650 winding 1. Purpose: To prevent the positive and negative electrodes f
View More
Lithium is the lightest metal with the smallest atomic mass in nature. Its relative atomic mass is 6.94g/mol, =0.53g/cm3. Li
View More
Design of universal programs General procedure for lithium battery design Battery design includes performance design and s
View More
The battery case is to protect the battery and the internal circuit protective case. In order to make the battery waterproof
View More
What are the performance testing methods? Lithium battery performance testing includes voltage, internal resistance, capacity
View More
Battery maintenance 1) It is recommended to use +5℃~+30℃ batteries (preferably 25℃). High temperature will shorten the li
View More
Common sense of electric vehicle charging and the first charging time. Electric cars seem to play a great role in our lives.
View More
The preparation of 18650 positive (negative) mud is a mixing process of positive (negative) active material, conductive agent
View More
Although the lithium battery is a maintenance-free battery, it does not require special maintenance work, but it cannot be
View More
With elusive environmental pollution and fluctuations in oil and natural gas prices, energy electrification is an irreplacea
View More
Instructions In the process of using 18650, don't know so much, just understand how the battery is charged,
View More
Fire safety test In order to determine how far the battery can catch fire after overcharging, and how long it can cat
View More
Common sense of electric vehicle charging and the first charging time. Electric cars seem to play a great role in our lives.
View More
Matters needing attention when mixing 18650 lithium battery raw materialsThe preparation of 18650 positive (negative) mud is
View More
Although the lithium battery is a maintenance-free battery, it does not require special maintenance work, but it cannot be
View More
1. Regularly check the NP battery and replace the NP battery to prevent damage or leakage, such as abnormal performance, crac
View More
Lithium batteries use carbon as the negative electrode and lithium-containing compounds as the positive electrode. Lithium
View More
Maximizing the capacity/efficiency of the battery pack means setting all series batteries in the battery pack to the same SOC
View More
1. Wide range of use;(1). Notebook computers, walkie-talkies, portable DVDs, instrumentation, audio equipment, model airplane
View More
To extend the effective use time of the battery, in addition to guaranteeing the quality of the charger, correct charging tec
View More
Although lithium-based battery technology has existed for decades, one of its biggest advantages has created obstacles and is
View More
Announcement on the requirements for carry-on baggage of air passengersIn order to strengthen the air transportation safety
View More
Nowadays, batteries are used more and more in our lives. There are many kinds of batteries. Have you ever heard of cylindrica
View More
With the introduction of new national standards, the era of lithium batteries has arrived. Lithium batteries used in elect
View More
Nowadays, almost all the indispensable mobile phones in our daily life are lithium batteries, but not everyone knows how to
View More
Safe storage Lithium battery storage performance and self-discharge manufacturers: The phenomenon that the storage capacit
View More
One is overcharging and overdischarging. Overcharging or over-discharging can easily cause the cathode material or electrolyt
View More
Remote meters have high requirements on batteries due to their special working environment and working methods. It requires
View More
1. Lithium battery does not work When the capacity of the lithium battery is lower than normal, it will sleep for a peri
View More
Why use electric vehicles as energy sources? Electric vehicle batteries are the power source of electric vehicles. Most el
View More
The overall level of China is still far lower than that of developed countries By 2013, the supply will reach 4 billion
View More
Keywords: lithium battery, power tool, lithium protection, overcharge and overdischarge 0 Preface At present, the deve
View More
The production process of lithium battery is long and there are many equipments. Lithium battery equipment refers to variou
View More
Uses and challenges of test equipment in manufacturing. With the rapid development of lithium batteries, testing equipment us
View More
The last section is how to buy a notebook: the devil is in the details, the author introduces to everyone to buy a notebook i
View More
In order to conform to the trend of the times and the needs of all walks of life, the production technology is constantly up
View More
Since the birth of lithium-ion batteries, safety issues have been accompanied. As the energy density of the battery cell get
View More
What do they have? 1. Lithium batteries are divided into square lithium batteries (such as ordinary mobile phone batteries)
View More
[Abstract] This article briefly introduces the basic failure model of lithium batteries and the rate capacity effect of lithi
View More
Why your mobile phone battery can't be used in winter However, many people have encountered this problem when usi
View More
How to effectively extend the service life of lithium batteriesThe key is how to extend the life of lithium batteries in elec
View More
There have been news reports recently that some consumers’ mobile power supplies exploded or burned, and a flight attendant d
View More
What do they have? 1. Lithium batteries are divided into square lithium batteries (such as ordinary mobile phone batteries)
View More
[Abstract] This article briefly introduces the basic failure model of lithium batteries and the rate capacity effect of lithi
View More
1. Why do electric cars use it?With the rise of the new energy automobile industry, the competition among a large number of m
View More
Under the guidance and promotion of national policies, the production and holdings of new energy vehicles have continued to r
View More
Before understanding the 18650 battery, first understand what the LED flashlight refers to? It is a new type of lighting tech
View More
Remember that mobile phones from ten years ago can basically replace the battery, except for Apple of course. But now mobile
View More
The system energy density refers to the weight or volume of the entire battery system compared to the weight or volume of the
View More
The energy density of a lithium battery (Energydensity) refers to the amount of energy stored in a unit of a certain space or
View More
As the main part of the cell’s internal isolation from the external environment, the aluminum film used in the packaging of l
View More
1. In high-rate lithium batteries, the capacity of the thin positive electrode is lower than that of the thick positive elect
View More
aluminum-plastic film for polymer lithium battery packagingAs the main part of the cell’s internal isolation from the e
View More
1. In high-rate l
View More
As the main part of the cell’s internal isolation from the external environment, the aluminum film used in the packaging of l
View More
1. In high-rate lithium batteries, the capacity of the thin positive electrode is lower than that of the thick positive elect
View More
After the battery has discharged the internally stored power, after the voltage reaches a certain value, continuing to discha
View More
Overdischarge refers to the discharge when the voltage reaches the rated voltage and continues to discharge. For example, the
View More
Everyone is more concerned about the price, weight, life and charging of the 12v60 lithium battery. Let's discuss the ans
View More
As the core component of new energy electric vehicles, batteries have always attracted attention. The continuous sponta
View More
It may be because mobile phones are becoming more and more useful in our lives, so many people hope that the battery life of
View More
In our country, the Suiren started the era of human use of fire, which enabled humans to use the era of primary energy, so th
View More
Due to the large distance between my country’s energy center and power load center, the power system has al
View More
1. Principles and characteristics of energy storage technologyThe energy storage device composed of energy storage elements a
View More
If you have no confidence in the battery management system BMS and you have the conditions to build your own charging pile, i
View More
The charging pile is actually equivalent to a gas dispenser in a gas station. The popularization of new energy vehicles has a
View More
There is no absolutely safe battery in the world, only risks that are not fully identified and prevented. Make full use of th
View More
How old are lead-acid batteries? It was invented by the French Planter in 1859 and has a history of more than one hundred yea
View More
AGM storage battery refers to a storage battery with ultra-fine glass wool material used in the separator. AGM refers to the
View More
Last year, the global announcement of the timetable for the ban on the sale of fuel vehicles made people realize that the era
View More
The development of new energy and electric vehicles will use lithium-ion batteries with relatively high energy density. In th
View More
The age of battery is coming. Whether it is the new energy vehicle industry or the distributed energy storage industry, the u
View More
Generally, the storage performance of the battery will decrease as the number of charging and discharging increases, and user
View More
The current mainstream technology route for electric vehicles is lithium-ion batteries and fuel power batteries (PEMFC). Rela
View More
(1) Because the BMS of this system has the function of preventing overcharging, so as to ensure that the battery will not hav
View More
The battery management system is the device with the most comprehensive understanding of battery performance and status. Ther
View More
At present, the charging of lithium-ion battery packs generally adopts series charging, which is important because the series
View More
The battery on the battery car can be understood as a movable and dischargeable power source. The power source is ultimately
View More
Many forecasts believe that the lifetime cost of owning and driving an electric car will be comparable to that of a petrol ca
View More
1. Why do electric cars use it?With the rise of the new energy automobile industry, the competition among a large number of m
View More
Under the guidance and promotion of national policies, the production and holdings of new energy vehicles have continued to r
View More
Under the guidance and promotion of national policies, the production and holdings of new energy vehicles have continued to r
View More
Remember that mobile phones from ten years ago can basically replace the battery, except for Apple of course. But now mobile
View More
Many forecasts believe that the lifetime cost of owning and driving an electric car will be comparable to that of a petrol ca
View More
1. Why do electric cars use it?With the rise of the new energy automobile industry, the competition among a large number of m
View More
Under the guidance and promotion of national policies, the production and holdings of new energy vehicles have continued to r
View More
Before understanding the 18650 battery, first understand what the LED flashlight refers to? It is a new type of lighting tech
View More
Remember that mobile phones from ten years ago can basically replace the battery, except for Apple of course. But now mobile
View More
1. Power tool batteries made of ordinary lithium-ion batteriesIf the power tool battery is made of ordinary lithium-ion batte
View More
1. Wide range of use;(1). Notebook computers, walkie-talkies, portable DVDs, instrumentation, audio equipment, model airplane
View More
To extend the effective use time of the battery, in addition to guaranteeing the quality of the charger, correct charging tec
View More
Although lithium-based battery technology has existed for decades, one of its biggest advantages has created obstacles and is
View More
There are still many people who have such doubts: are not all lithium batteries the same, and what can be the difference. If
View More
The active balancing method of lithium battery packs uses an active reciprocating charging element, a voltage or current conv
View More
The system energy density refers to the weight or volume of the entire battery system compared to the weight or volume of the
View More
The energy density of a lithium battery (Energydensity) refers to the amount of energy stored in a unit of a certain space or
View More
As the main part of the cell’s internal isolation from the external environment, the aluminum film used in the packaging of l
View More
1. In high-rate lithium batteries, the capacity of the thin positive electrode is lower than that of the thick positive elect
View More
Lithium manganate is one of the more promising lithium ion cathode materials. Compared with traditional cathode materials suc
View More
Lithium iron phosphate as a lithium power lithium battery material has only appeared in recent years. The domestic developmen
View More
Many people now buy a new smartphone, they will consider the battery life of the phone, and also consider whether this smartp
View More
Efficient, safe, and reliable power lithium battery is the bottleneck restricting the new near-zero emission automobile indus
View More
Safe and reliable power lithium battery is the bottleneck restricting the new near-zero emission automobile industry, and it
View More
Due to its abundant raw material reserves and low price, sodium ion batteries have attracted more and more researchers' a
View More
Recently, Chinese and American scientists have jointly developed an antimony sulfide-based anode material with a new structur
View More
The battery is a mobile power source that allows the electric device to work without directly plugging it into a power outlet
View More
Efficient, safe, and reliable power lithium battery is the bottleneck restricting the new near-zero emission automobile indus
View More
Safe and reliable power lithium battery is the bottleneck restricting the new near-zero emission automobile industry, and it
View More
Due to its abundant raw material reserves and low price, sodium ion batteries have attracted more and more researchers' a
View More
Recently, Chinese and American scientists have jointly developed an antimony sulfide-based anode material with a new structur
View More
The battery is a mobile power source that allows the electric device to work without directly plugging it into a power outlet
View More
1. In high-rate lithium batteries, the capacity of the thin positive electrode is lower than that of the thick positive elect
View More
The composition of lithium cobalt oxide battery materials, LiCoo2 basically selects the layered structure of the lithium-ion
View More
After the battery has discharged the internally stored power, after the voltage reaches a certain value, continuing to discha
View More
Overdischarge refers to the discharge when the voltage reaches the rated voltage and continues to discharge. For example, the
View More
Everyone is more concerned about the price, weight, life and charging of the 12v60 lithium battery. Let's discuss the ans
View More
1) Today's lithium-ion battery materials are not flexible. How to adapt the battery materials to this application scenari
View More
1. Aluminum-plastic packaging filmAluminum-plastic packaging film (abbreviated as aluminum-plastic film) is composed of three
View More
The 12v lithium-ion battery protection circuit will increase the additional loss of battery energy and reduce the application
View More
First, the amount of liquid injection:Generally speaking, the injection volume of the ternary 186502.6-3.2Ah cylindrical batt
View More
The internal resistance of the battery refers to the battery resistance when current flows through the battery. It includes o
View More
Battery capacity is one of the important performance indicators to measure battery performance. It represents the amount of p
View More
The initial meeting is always incomplete, so you need to refer to other people’s experience. The same is true for the i
View More
An over-pressure protector is generally installed on the mixer. The role of this over-pressure protector is very important, a
View More
The mixer will continuously discharge dirty water during the operation. If the dirty water is not treated in time, it will no
View More
The power of the side-entry agitator will have some influence on all aspects of it during use, so everyone must pay attention
View More
There are many users who have certain doubts about the ingredients of the mixer, and they don't know how to do the ingred
View More
The general lithium-ion battery protection board is composed of control IC, MOS tube, resistance capacitor, fuse FUSE, etc.,
View More
For some lithium-ion batteries, the third line is the temperature maintenance line, and some are the battery information chec
View More
When the lithium ion battery is charged, the positive lithium atoms will lose the electronic devices, and the air will be oxi
View More
1. The lithium-ion battery of the balance car needs to be charged with a special charging head. The battery charging reliabil
View More
Battery SOH research is difficult and progress is slow, but SOH research is of great value to the use, maintenance and evalua
View More
In recent years, there have been many domestic and foreign documents studying the aging mechanism and laws of lithium-ion bat
View More
Nowadays, the research and development technology of electric vehicles is constantly improving, and electric vehicles
View More
Nowadays, with the long-term development of science and technology, many electronic devices have made our lives more convenie
View More
Pore size and distribution1. The size and distribution of the pore size are related to the preparation method; 2. The pore si
View More
(1) Module installation: This process is the first process for preparing battery packs. Match the finished modules, battery p
View More
Lithium titanate battery has the advantages of small size, light weight, high energy density, good sealing performance, no le
View More
Quickly understand lithium-ion batteriesFirst of all, we must understand the charging and discharging principle of lithium-io
View More
Objectively speaking, the lithium-ion battery production process is divided into three sections: one is pole piece production
View More
The structure of a lithium-ion battery is divided into five parts, namely the positive electrode, the negative electrode, the
View More
Charging a mobile phone is something we all need to do every day. With the rise of mobile phone fast charging technology, the
View More
On January 20, 2021, Hyundai Motor, Korea East-West Electric Power Corporation and Deyang Corporation jointly held the comple
View More
Polymer lithium battery is also called polymer lithium battery: Compared with previous batteries, it is a chemical battery wi
View More
The rear motor of the polymer lithium electrode film is deposited with a dark color to enter the rechargeable battery a
View More
It is circulated on the Internet that the first charge to activate the lithium-ion battery must be more than 12 hours, and th
View More
Is mobile phone lithium battery the same as electric car lithium battery? The response is: the situation is different.
View More
1. The lithium battery cannot be charged. When charging, the lithium battery pack in a pure electric vehicle cannot be c
View More
With the development of science and technology and the improvement of living standards, our travel has become more and
View More
Based on the national policy of "energy saving and emission reduction", the mobile communication base station in
View More
At present, the composition of lithium battery packs is composed of single or single lithium batteries through s
View More
Raw material inspection, raw material pretreatment, ingredients and ingredients in
View More
An over-pressure protector is generally installed on the mixer. The role of this over-pressure protector is very important, a
View More
1. Breakthrough progress has been made in the research and development of lithium-ion battery materialsmy country's graph
View More
Currently, the following methods are important to charge each single cell in a series battery pack.1. Add a parallel equaliza
View More
Card-type or wearable smart devices often encounter usage scenarios that need to be carried in a wallet or pocket, which requ
View More
1. The problem of battery screening, how to distinguish between good and bad after the battery is in hand. Internal resistanc
View More
1. The relationship between 18650 lithium battery price and capacityCapacity is a hot spot for most new users. The larger the
View More
Now the domestic recycling battery industry has just started, and the corresponding recycling rate is only 2%, which is reall
View More
Silicon Valley Sila Nanotechnology Corporation recently announced that it has raised $70 million to expand its new silicon-li
View More
18650 is currently the most mature power battery product. Without safety, there is no maturity...Maturity also means safety,
View More
Lithium-ion batteries can be divided into consumption, power and energy storage according to application scenarios. Nowadays
View More
The application range of lithium battery packs is very broad: small computer rooms, weak current rooms and other room sub-
View More
Prevent the misunderstanding of battery charging 1. No initial charge The first charge of the battery i
View More
The first step: completely discharge the battery after stripping, according to the current status of the battery, let the bat
View More
Lithium iron phosphate (LiFePO4) has an olivine structure, a slightly distorted hexagonal close-packed, and its space g
View More
In recent years, as General Secretary Xi’s idea that green water and green mountains are golden mountains and silver mountain
View More
Short-circuit form of polymer lithium ion battery One is that the current collector of the anode and cathode break
View More
Objectively speaking, the lithium-ion battery production process is divided into three sections, one is pole piec
View More
The structure of lithium ion battery The structure of a lithium-ion battery is divided into five parts, namely the
View More
Recycling in the battery industry is the most appealing topic. Domestic and international regulations on the mercury content
View More
1. Transport the waste lead-acid batteries to the warehouse of the smelting plant in a special environmentally fr
View More
Lithium iron battery is a kind of lithium ion battery that uses lithium iron phosphate as the positive electrode material tha
View More
I believe that everyone has been exposed to the concept of cell balance. The main reason is that the current cell consistency
View More
With the process of economic globalization and the ever-increasing demand for energy, finding new energy storage device
View More
With the process of economic globalization and the ever-increasing demand for energy, finding new energy storage devices has
View More
1. Packaging components of lithium batteries: PACK is composed of battery pack, protective board, outer packaging or s
View More
The difference has the following manifestations: 1. Durability: Lead-acid batteries are generally deep-charged and
View More
The battery life of an electric vehicle has a great relationship with the usage habits. Lead-acid batteries have no memory, s
View More
The battery life of an electric vehicle has a great relationship with the usage habits. Lead-acid batteries have no memory, s
View More
Causes of hidden dangers of power lithium batteries The power lithium battery is an energy carrier, indicating tha
View More
The improvement of the quality of new-type lithium-ion batteries is not only at the technical level, but also the improvement
View More
1. Organic polymer system of solid-state lithium battery electrolyte The electrolyte and separator used in conventional
View More
Judging from the existing cooling methods of power lithium batteries for electric vehicles, air cooling has always occu
View More
The cooling performance of the power lithium battery directly affects the efficiency of the battery, as well as the battery l
View More
1. Capacity characteristics of lithium-ion batteries The capacity test obtains the relationship between the discharge vo
View More
What are the functions of the battery management system?BMS function introduction and analysis 1. Battery protecti
View More
Lead-carbon battery characteristics: Technical advantages The first is fast charging, which increases t
View More
Is the energy density high? High energy density is the biggest advantage of the Trinity, so under the same weight of battery
View More
Causes of capacity attenuation Lithium batteries are the fastest growing secondary batteries after nickel-cadmium ba
View More
Causes of capacity attenuation of ternary materials ●Cathode material structure changes Cathode material is
View More
1. The cathode material should have a higher oxidation-reduction potential, so that the battery has a higher output voltage;&
View More
Battery balancing problemThere are two important manifestations of battery imbalance. One is the low capacity of a single bat
View More
The importance of lithium-ion battery management chips In order to improve the safety of lithium-ion batteries, in
View More
Whether the lithium-ion battery can be charged quickly depends on the experimental data of the lithium-ion batter
View More
Uninterruptible power supply UPS replacement process of large-capacity battery 1. The construction personnel bring
View More
Technical Analysis of Cathode Material Performance for Lithium Iron Phosphate Battery 1. The cathode material shou
View More
Battery balancing problem There are two important manifestations of battery imbalance. One is the low capacity of
View More
A solid-state battery, as the name suggests, is a battery that uses solid electrodes and solid electrolytes. Since the electr
View More
Two preventions: prevent over-discharge, prevent over-charge Overdischarge: The deeper the depth of overdisc
View More
With the in-depth development of the new socialist countryside and the construction of beautiful villages, solar street light
View More
E-cigarette battery safety Please read carefully how to dispose of the battery or charger, it may cause ventilation or p
View More
It is well known that a good power battery can make e-cigarettes even more powerful. It is directly related to the size, batt
View More
Research status of zinc-air primary battery Zinc-air batteries have been developed to the present, and their relat
View More
ery. 1. Injection volume: Generally speaking, the injection volume of the ternary 186502.6-3.2Ah cylind
View More
The self-discharge rate, also known as the charge retention capability, refers to the retention capability of the
View More
The internal resistance of the battery refers to the resistance that the current flows through the battery when t
View More
battery capacity Battery capacity is one of the important performance indicators to measure battery performance. I
View More
1. Lithium-ion battery battery material processingSome materials used in secondary batteries, such as lithium ion, require sp
View More
During the first charge of the lithium-ion battery, Li+ is removed from the active material of the positive elect
View More
Lithium battery technologyLithium-ion battery formation steps Step ①: The electrons are transferred from the insid
View More
The circuit has the functions of overcharge protection, overdischarge protection, and overcurrent protection. Its working pri
View More
Basic technical indicators of battery: ①Valve-regulated sealed lead-acid battery: each UpS is connected to one set
View More
The production process is as follows: Alloy configuration---->Grid manufacturing---->Mechanical coating----&
View More
In the process, there are many connection methods when testing the battery protection board on non-standard batte
View More
The connection method of the battery protection board is generally used for protection boards, but there ar
View More
The development trend of lithium-ion battery electrolyte technology 1. High specific energy electrolyte
View More
1. Thickness There are two important online control technologies for the thickness of lithium-ion battery di
View More
1. Thickness There are two important online control technologies for the thickness of lithium-ion battery di
View More
The positive electrode active material of the nickel-hydrogen battery is Ni(OH)2 (called NiO electrode), the negative electro
View More
In summary, VRLA batteries have the following characteristics: (1) No need to add water to adjust the density of a
View More
Commonly used batteries include lead-acid batteries, nickel-cadmium batteries, iron-nickel batteries, metal oxide batteries,
View More
1) Hydrotherapy For vulcanized batteries, you can first discharge the battery, pour out the original electrolyte a
View More
Basic knowledge of battery use and maintenance 1. Keep the battery fully charged and ride the electric moped every day, regar
View More
Lithium ion battery separator production process 1. The dry method first melts, extrudes and blows the polyolefin resin to
View More
Technical development analysis of battery cathode materials ①Lithium manganate cathode material Lithium manganate is an e
View More
Technical development of anode materials for lithium-ion batteries ①Graphite anode material Graphite has the advantages o
View More
Lithium-ion battery recycling technology 1. Cascade utilization and raw material recycling For retired power lithium-ion
View More
The battery itself still has available capacity, but due to the imbalance between the batteries and the safety voltage limi
View More
The 12v lithium battery is a voltage close to 12v obtained by connecting multiple 3.7v lithium batteries in series, and we
View More
Causes of MOS tube burnout during battery protection board discharge: There is a short-circuit phenomenon in the welding p
View More
When the cell voltage is between 2.5V and 4.3V, both pins 1 and 3 of DW01 output high level (equal to the supply voltage),
View More
Summary of abnormal reasons for lithium battery, including lithium battery capacity, internal resistance of lithium battery
View More
Common bad analysis of lithium battery protection board 1. No flicker, low output voltage, no load This type of defect sh
View More
Now our lives are inseparable from the Internet and mobile phones, and mobile phone chargers are also indispensable product
View More
Batteries are the "core" of electric vehicles, and lithium batteries have begun to show various advantages. Howev
View More
One, the choice of the core of lithium battery pack: First of all, the choice of batteries for different material systems
View More
The fire of a lithium battery pack is a very unusual situation, but once it happens, it will cause a strong reaction and a
View More
There are many types of lithium battery chargers, the most widely used are sealed lead-acid batteries and nickel-cadmium ba
View More
Generally, the life of a lithium ion battery can reach hundreds of charge and discharge cycles. The charge-discharge cycle
View More
How to recover the imbalance of the lithium battery pack? Next, I will give you a brief introduction. 1. First, charge the
View More
What are the reasons for the inconsistency of lithium battery packs? Next, I will give you a brief introduction. From the
View More
With the introduction of the new national standard, the era of lithium batteries has arrived. There are three main types of
View More
Storage battery is a kind of battery. Its function is to store limited electric energy and use it in suitable places. Its w
View More
As we all know, new market demand for lithium-ion batteries is forming very quickly. Lithium-ion batteries are currently di
View More
The charging current of the mobile phone is controlled by the mobile phone, not the charger. In other words, the mobile pho
View More
"The more the lithium battery is discharged, the greater the loss of the battery," said Tom Hartley, a professor
View More
Lithium manganese oxide is a typical spinel structure cathode material. The theoretical energy density reported in the lite
View More
The performance of high-voltage lithium-ion batteries is mainly determined by the structure and properties of the active ma
View More
With the continuous improvement of the requirements for the capacity of lithium-ion batteries by electrical equipment, peop
View More
So far, the basic design of lithium-ion batteries is still the same as SONY’s patent application published in 1989. The sha
View More
From the perspective of commercial lithium-ion power battery systems, key core technologies include battery pack technology
View More
A few days ago, big news in the domestic power battery industry broke out frequently. First, SAIC entered the power battery
View More
What is a polymer lithium battery? What are the advantages of a polymer lithium battery? Let’s take a look at the editor of
View More
1. The energy ratio is relatively high. With high storage energy density, it has reached 460-600Wh/kg, which is about 6-7 t
View More
1. Using air as a medium: Air heat dissipation means that air sweeps across the surface of the battery to take away the hea
View More
Increasing the energy density of lithium batteries is a relatively systematic thing. We can start by optimizing the battery
View More
The positive electrode material of lead-acid battery is mainly composed of PbO2, and the negative electrode material is mai
View More
The structure of the lithium battery relies on the movement of lithium ions between the positive electrode and the negative
View More
Many people have reported that the current lithium batteries are not as durable as before. Not only the mileage has decreas
View More
One disadvantage of lithium battery: 1. Lithium-cobalt data Lithium batteries cannot be discharged under high current, and
View More
Three common methods for repairing lithium-ion batteries in mobile phones: 1. Use a clean eraser or cleaning tools of othe
View More
At present, the main raw materials of lithium batteries are lithium cobalt oxide, lithium nickel oxide and lithium iron pho
View More
What is the best current for charging a lithium battery? There is no uniform standard, but it depends on what type of lithi
View More
What is the difference between lithium battery and power lithium battery 1. The battery capacity is different: in the case
View More
Simple maintenance of lithium batteries for electric vehicles 1. Proper charging and discharging to prevent damage: Excess
View More
What are the advantages and disadvantages of lithium battery customization 1. Customize on demand and provide comprehensiv
View More
Recently, the my country Association of Automobile Manufacturers released data showing that in the first two months, sales
View More
First of all, depending on the length of standby time of the purchased battery, the real battery should be the same as the
View More
If you buy a new mobile phone or a new laptop, does the salesperson often ask you to charge the mobile phone or computer fo
View More
Lithium iron phosphate battery and polymer battery have their own characteristics at low temperatures Using patented batte
View More
It should be noted during the use of the 18650 lithium battery that the battery will enter the dormant state after being pl
View More
There are four common influencing factors, namely discharge rate, temperature, terminal voltage, and board geometry. 1. Di
View More
Cathode material is the most critical raw material, accounting for more than 30% of the cost and the largest proportion. Th
View More
Lithium battery safety issues 1. Cobalt acid: The main feature of this preparation method is that a large amount of lithiu
View More
Currently, lead-acid battery electric vehicles are the most sold on the market, but many regions have begun to introduce li
View More
What are the lithium battery charge management IC chips? 2 series 7.4V lithium battery is also called 8.4V lithium battery
View More
A safer electrolyte for lithium-ion batteries, containing the flame retardant trimethyl phosphate, is a non-flammable high-
View More
The ternary lithium battery or lithium iron battery we often say is the name given to the lithium battery based on the posi
View More
The basic structure of the soft pack battery is similar to that of a cylinder and a box. They are all positive electrode, n
View More
Lithium primary battery has low self-discharge and can be stored for up to 3 years. The cold storage effect is better. It i
View More
Pu Xun lithium battery cathode materials are currently being used and developed, mainly including lithium cobalt oxide, lit
View More
Lithium-ion batteries may be overcharged for too long. Li-ion batteries or chargers will automatically stop charging when t
View More
Increase the lithium battery specifications of lithium battery manufacturers: The lithium battery pack is composed of hundr
View More
Factors affecting the price of lithium batteries 1. Selection of batteries First, the selection of batteries with differe
View More
Charge in time to prevent over-discharge. Ordinary mobile phone users are not aware of the hazards of over-discharge, becau
View More
Grasp the time and prevent overcharging. Do the right thing at the right time, although the lithium battery itself has exce
View More
Because of the relatively large area of our country, people may be more anxious about the cruising range, so domestic power
View More
Recently, at a domestic conference, Xiao Chengwei, an expert from the national “863” plan energy conservation and new energ
View More
The recent spontaneous combustion accidents of electric vehicles have once again caused the safety of new energy vehicles t
View More
Although the epidemic has caused a huge impact on the global automobile market, the new energy automobile market is showing
View More
Through a clearer understanding of the components of lithium ion, various mathematical and computational models are used to
View More
A new study by the Technical University of Munich (TUM) shows that the number of patent applications for electrochemical en
View More
Due to the revolutionary impact of lithium ion batteries (LIBs) on the entire world's economic and technological develo
View More
Some related steps of lithium-ion battery assembly technology: 1. Battery material handling Some materials used in second
View More
Production process of lithium-ion battery soft pack cells: Soft-packed lithium batteries are thermally packaged, while met
View More
There are two typical follow-up paths for lithium-ion battery recycling, cascade utilization or direct material recycling.
View More
Assembly process and method of soft-packed lithium iron phosphate battery Aluminum plastic film forming process The soft-
View More
The difference in technical characteristics of square, cylindrical and soft packages 1. Battery shape: The square lithium-
View More
Feeding: raw materials such as PE or PP and additives are pretreated according to the formula and then transported to the e
View More
Production process of lithium iron battery diaphragm The production process of lithium iron battery separators is mainly d
View More
The recycling process of used UPS lead-acid batteries: 1. Transport the waste lead-acid batteries to the warehouse of the
View More
Active balancing has abandoned the passive balancing method of current consumption and changed to a method of transmitting
View More
New energy vehicles refer to vehicles that use unconventional vehicle fuels as their power source, including four types: hy
View More
After the lithium battery cell is overcharged to a voltage higher than 4.2V, side effects will begin to occur. The higher t
View More
Factors affecting the low temperature performance of lithium batteries 1. Cathode material Cathode material as a power so
View More
Warnings and precautions when using high-capacity lithium batteries To prevent possible leakage, heat generation and explo
View More
As electronic equipment has more and more varieties, more and more functions, more and more power consumption, smaller and
View More
At present, the Chinese market is flooded with many imported brand B products. The so-called B products are divided into &q
View More
18650 lithium battery customization generally contains too many elements of lithium battery customization. The analysis of
View More
The three elements of a general battery: positive electrode, negative electrode and electrolyte. The so-called polymer lith
View More
What kind of lithium iron phosphate battery company has the characteristics of becoming a large company? As long as it has
View More
Charge in time to prevent over-discharge. Ordinary mobile phone users are not aware of the hazards of over-discharge, becau
View More
36v lithium battery is an energy storage conversion device that is more and more widely used. Because of its excellent elec
View More
The working principle of the solar energy storage polymer lithium battery, when photons with suitable energy are irradiated
View More
The working principle of the solar energy storage polymer lithium battery, when photons with suitable energy are irradiated
View More
In the formula, Vmax refers to the maximum output voltage; Imax refers to the maximum output current; Pmax refers to the ma
View More
18650 lithium battery separator ①Thickness For consumable lithium-ion batteries (batteries used in mobile phones, noteboo
View More
The base material used in lithium ion battery separators is polyolefin, which has excellent mechanical properties, chemical
View More
The contradictory and opposite sides of the development of lithium batteries are accompanied by each other. Without one, th
View More
maintenance of the electric vehicle and the combustion of the battery. 1. Do not store at a loss of electricity: the state
View More
Do not charge in the sun in summer, and all electric vehicle batteries must be charged frequently. The charging time is bes
View More
The lithium battery is wound into the shell and the bottom welding roll groove follows the principle that the negative elec
View More
Model naming of square battery: 6 numbers indicate the thickness, width and height of the battery, in millimeters. When any
View More
So far, polymer or inorganic solid electrolytes that can meet the requirements of practical lithium-ion batteries are still
View More
The short life span of a laptop is because the BIOS system of the laptop misjudged the battery attack during the repeated c
View More
The relationship between the time (hours, days) of a graphene battery in a saturated copper chloride solution and the appea
View More
The recycling process of used lithium-ion batteries includes pretreatment, secondary treatment and advanced treatment. Beca
View More
This process is the last process. The stirred slurry is evenly sprinkled on the bottom of the 4000 meters of copper foil at
View More
The battery is the smallest battery in the battery system. This is the basic structure of automotive power lithium batterie
View More
Opportunity 1: Low-carbon and environmental protection, the global automotive electrification wave is irreversible Driven
View More
With the surge in demand for lithium-ion batteries, the price of cobalt, a previously unknown element, is also rising rapid
View More
The high-voltage cathode data of lithium-ion batteries has been a research hotspot in recent years. The development of a ne
View More
The positive data of lithium-ion batteries is usually composed of lithium active compounds, while the negative electrode is
View More
When the battery is charged, the lithium atoms on the positive electrode are ionized into lithium ions and electrons (deint
View More
Graphene is called a miraculous material because of its high electrical conductivity, high thermal conductivity and high st
View More
Lithium-ion solid electrolyte data, as the core component of all-solid-state lithium-ion batteries, is the core data to
View More
The technology and market of anode materials are relatively outdated, and primary carbon materials and graphite anode mater
View More
Designed and implemented a new lithium-ion battery management system Battery conduction system (management system,
View More
Different battery data systems have different advantages and disadvantages. New battery data systems continue to appear, sh
View More
With the popularization of mobile phones, notebook computers, digital cameras and other electrical appliances, the producti
View More
After 3C lithium-ion batteries pass the 3C certification, battery manufacturers can start production. The completed 3C lith
View More
The scope of application of 3C lithium-ion batteries includes portable electronic products and mobile communication product
View More
Decompose according to customer needs and gradually decompose the design. Each process will eventually be transformed into
View More
With the development of economy, electronic products have entered ordinary people's families. People's application
View More
Lithium battery positive (negative) electrode slurry preparation is a mixing process in which positive (negative) electrode
View More
Among all environmental factors, temperature has the greatest impact on the battery's charge and discharge performance.
View More
Lithium battery packs usually consist of one or several battery packs in parallel, and each battery pack consists of 3 to 4
View More
Preparation of lithium battery injection tools: beakers, liquid bottles, glass rods, droppers, plastic pipes, valves and ot
View More
The dried polymer lithium battery, additives and auxiliary equipment are taken into the glove box: the transition must be p
View More
First give a table: as follows, the percentage is the remaining capacity of the battery, and the right side is the open cir
View More
The phenomenon that the lithium battery pack does not discharge: After charging the lithium battery pack into the device, t
View More
Lithium batteries are divided into polymer lithium batteries and liquid lithium batteries, how to distinguish it? What are
View More
With the advancement of the technological age, Grignard battery products have enriched our lives, and the polymer lithium b
View More
To understand the difference in 36V lithium battery prices, we must first know how 36V lithium batteries are produced. Let&
View More
At present, batteries have been used in more and more fields. In most cases, we only know nickel, chromium and other elemen
View More
The lithium battery used in aerial photography is called "lithium polymer battery" (Li-polymer, also known as pol
View More
Polymer battery performance advantages 1. It is small in size and can be made thinner. Ordinary liquid lithium-ion batteri
View More
How to distinguish the methods of testing polymer batteries 1. Distinguish from the advantages 1. Replace the original li
View More
The current comparison between lithium batteries and NiMH batteries is mainly as follows: The comparison between lithium b
View More
At present, Ni-MH batteries are used in different products. We should know a little about its use and maintenance. Nowadays
View More
Lithium battery structure is divided into battery cell and battery pack Batteries: mainly composed of positive and negativ
View More
High-rate polymer lithium battery, let's first understand the concept of rate. How to understand the discharge rate? Di
View More
There are many types of rechargeable batteries, but they require high energy density, light weight, and large discharge cur
View More
Now all lithium batteries are used on fpv, and many pilots use 3s/4s batteries in fpv racing competitions. The so-called 3
View More
Using polymer batteries, let’s talk about some experience. If there is something wrong, please point it out. In the use of
View More
The polymer battery has many obvious advantages such as high energy density, smaller size, ultra-thinness, light weight, hi
View More
Scientific maintenance method of lithium battery 1. Choose the charger produced by the authentic lithium battery charger m
View More
Lead and zinc are often accompanied by minerals and maintain a high degree of similarity in price trends, so they can be sa
View More
Lithium ion batteries can be divided into two categories: liquid lithium ion batteries and polymer lithium ion batteries. T
View More
The core problem solved by the assembly of lithium battery packs is the consistency of lithium batteries, that is, the volt
View More
Some people say that the key to new energy technology is batteries. Indeed, whether it is new energy vehicles, mobile phone
View More
The nine advantages of lithium batteries are as follows: 1. The energy is relatively high. With high storage energy densit
View More
With the rapid development of science and technology, the scope and role of lithium batteries have long been self-evident,
View More
The polymer lithium battery manufacturer tells you! First of all, the polymer is safer than 18650: under the same flow, ove
View More
This situation may be caused by two reasons. The user can first check whether the battery connection plug on the rear panel
View More
Maintenance of power infrastructure is essential to reduce the damage caused by unexpected power outages in the data center
View More
As we all know, in the battery power supply industry, battery power can be divided into online battery power, online intera
View More
The battery can realize uninterrupted power supply due to the battery. When there is an abnormality in the mains, the inver
View More
The application requirements of UPS power supply system in the communication industry. With the reorganization of the commu
View More
Power lithium battery is one of the most core components of new energy vehicles. It not only affects the driving range of n
View More
When customers buy rechargeable batteries, they usually feel confused about many types of rechargeable batteries, and they
View More
Certain metals have a strong ability to capture hydrogen. Under certain temperature and pressure conditions, these metals c
View More
Ni-MH batteries are divided into high-voltage nickel-hydrogen batteries and low-voltage nickel-hydrogen batteries. Low-vol
View More
As fossil fuels are becoming less and less under the condition of large-scale development and utilization of human beings,
View More
What are the reasons for the short circuit of the used battery to recover the battery? Is the battery short-circuited or th
View More
Why not use lithium batteries when replacing old batteries with new ones? Why do most UPS power supplies now use lead-acid
View More
Storage Battery is an installation that directly converts chemical energy into electrical energy. It is a rechargeable batt
View More
We should stop regular inspections of batteries, so how do we find the lack of capacity of batteries? The common methods of
View More
The correct way to charge the battery Correct charging method There are more and more electric devices in today's car
View More
Rechargeable lithium-ion battery is the most widely used battery in modern electronic products such as mobile phones and no
View More
Portable electronic devices are powered by batteries. With the rapid development of portable products, the use of various b
View More
Lithium is a metal element and its chemical symbol is Li (lithium). In addition to applications in the nuclear energy indus
View More
Power lithium battery temperature problem 1. Thermal management fault; Heating failure (heating board); when the temperat
View More
Power lithium battery communication failure and voltage failure 1. Communication failure LUM communication fails, BMU com
View More
Why are alkaline batteries better than other types?First, let’s learn about the excellent genes of alkaline batteries.Do yo
View More
What kind of battery should be used for common low-power devices such as TV remote control or alarm clock? Which battery is
View More
Li-ion battery protection board is a series of lithium-ion battery charge and discharge protection. After charging, it can
View More
Lithium iron phosphate battery refers to a lithium ion battery using lithium iron phosphate as the negative electrode mater
View More
Lithium-ion batteries are batteries that use lithium metal or lithium alloy as the positive electrode material and non-aque
View More
Ni-MH batteries are the real choice, and lithium-ion batteries are the direction of development. Liu Jun, a researcher at E
View More
The so-called lithium iron phosphate battery refers to a lithium ion battery using lithium iron phosphate as the positive e
View More
Data show that Ni-MH batteries dominate 90% of the global automotive battery market, and Japan has the most core technology
View More
Analysis of common faults in lithium ion battery BMS (2) 8. Battery current data error possible reason The Hall signal c
View More
Analysis of common failures of lithium-ion battery BMS (1) 1. The whole system does not work after power supply possible
View More
Introducing power lithium ion battery Advantage 1. The cycle life of ultra-long-life, long-life lead-acid batteries is ab
View More
The reason why lead-acid batteries are cheaper than lithium-ion batteries has been revealed. Most people consider the price
View More
Process principle of lithium ion battery separator 1. Drying method First, the polyolefin resin is melted, extruded, and b
View More
The production process of lithium iron battery separator is mainly divided into dry drawing method and wet drawing method.
View More
Battery production process 1. (positive, negative) dry mixing wet mixing rolling paste on the conductive substrate thre
View More
The soft-coated lithium iron phosphate battery can be designed into different sizes according to user requirements. When de
View More
The number of protection chips for a single lithium-ion battery should be determined according to the number of lithium-ion
View More
The power group uses lithium-ion batteries. The charged lithium-ion batteries need voltage, discharge voltage, over-current
View More
Process principle of lithium ion battery separator 1. Drying method First, the polyolefin resin is melted, extruded, and b
View More
The production process of lithium iron battery separator is mainly divided into dry drawing method and wet drawing method.
View More
Battery production process 1. (positive, negative) dry mixing wet mixing rolling paste on the conductive substrate thre
View More
The soft-coated lithium iron phosphate battery can be designed into different sizes according to user requirements. When de
View More
The number of protection chips for a single lithium-ion battery should be determined according to the number of lithium-ion
View More
The power group uses lithium-ion batteries. The charged lithium-ion batteries need voltage, discharge voltage, over-current
View More
The balance car is now a popular technical means of transportation, and it is already obvious as a means of transportation
View More
The development trend of lithium ion battery electrolyte technology 1. High specific energy electrolyte At present, the p
View More
Since 2017, the prices of phased products with excess production of lithium hexafluorophosphate have continued to fall, lea
View More
Lithium iron phosphate battery assembly 1. Battery material handling Some materials used in secondary batteries, such as
View More
The assembly process and working principle of lithium iron phosphate battery are introduced. Generally speaking, lithium ir
View More
three important subsystems of the battery management system (1) SOC estimation function It is very important to accuratel
View More
Batteries such as in-body radios, tape recorders, cameras, electronic clocks, toys, etc. are commonly classified as dry bat
View More
Lithium battery introduction 1. The development of lithium batteries In 1981, the first patent for lithium-ion batteries
View More
Lithium batteries are a type of rechargeable batteries that use graphite or other carbon materials as the negative electrod
View More
In fact, sometimes there is no need to worry if the phone heats up a little while the phone is charging, because charging t
View More
The replacement of auto batteries is relatively simple, requiring a wrench and a multimeter (for testing). 1). First, turn
View More
When starting the car, uninterrupted use of the starter will cause the battery to be damaged due to excessive discharge. Th
View More
Auto batteries will not have any symptoms in the early use. Once there is a problem, the battery basically needs to be repl
View More
The maintenance-free battery is made of lead-calcium alloy. Because the battery uses a lead-calcium alloy as the grid, the
View More
Repair, auto supplies, beauty and decoration, modification, tires, lubricants, and automotive aftermarket related service i
View More
The design life of the battery is 27 months. The average family car is relatively economical. The battery of a new car is u
View More
There are more and more new energy vehicles. New energy vehicles have a relatively large contribution to air quality. They
View More
In fact, through relatively extensive market research, and according to the "2019 China New Energy Vehicle Consumption
View More
Under normal circumstances, car batteries can be used for 3 to 5 years. If the time is longer, it is likely that the vehicl
View More
There are two main types, one is a lead-acid battery with electrolyte and the other is a maintenance-free battery. Lead-ac
View More
In the process of lithium battery cutting, the quality of the cutting edge of the pole piece has an important impact on the
View More
What is the difference between power lithium battery and ordinary lithium battery? Investigation and analysis found that th
View More
The performance analysis of the difference between power lithium battery and ordinary lithium battery 1. For example, lith
View More
There are still many people who have such doubts: Are lithium batteries all the same, and what can be the difference. If yo
View More
There is no standard for the related lithium battery electric heating film, and the standards for the construction industry
View More
Preparation of lithium cobalt oxide for lithium cobalt oxide battery The method for preparing active lithium cobalt oxide
View More
What are the hazards of overcharging and overdischarging lithium batteries? Overdischarge refers to the discharge when the
View More
Lithium manganese oxide batteries are a type of lithium ion batteries. For the classification of lithium ion batteries, bec
View More
Lithium battery charge and discharge requirements 1. Lithium battery charging: According to the structural characteristics
View More
Characteristics and introduction of lithium batteries 1. Higher weight-to-energy ratio and volume-to-energy ratio; 2. The
View More
Lithium battery is currently one of the most commonly used battery types in electric vehicles. Although it has not been a l
View More
1. When starting the engine, it provides a strong current for the starter, and at the same time supplies power to the ignit
View More
The advantages and disadvantages of storage batteriesDry-charged lead-acid storage batteries are called dry-charged storage
View More
Maintenance of storage batteries There will be no symptoms in the early use of storage batteries. Once there is a problem,
View More
The rated voltage of a single lead-acid battery is 2V, the number of charge and discharge times is between 200-300, and the
View More
Types of storage batteries The main function of storage batteries is to start the engine and power the entire vehicle's
View More
The maintenance of lead acid batteries is indispensable. Whether it is manual operation or maintenance or automatic monitor
View More
Transportation-cars, trains, tractors, motorcycles, electric vehicles, etc.; Telecommunications and power-post and telecom
View More
Lead storage battery is composed of positive plate group, negative plate group, electrolyte and container. The positive pla
View More
Lead-acid battery (VRLA) is a storage battery whose electrodes are mainly made of lead and its oxides, and the electrolyte
View More
One. According to the use of lead-acid batteries, they can be divided into: 1. Starting battery: mainly used in automobile
View More
Lithium batteries are divided into lithium batteries and lithium ion batteries. Cell phones and laptops use lithium ion bat
View More
Introduction of materials and electrolyte for lithium ion batteries diaphragm The market-oriented diaphragm materials are
View More
Lithium-ion battery cell raw materials Cathode material Cathode materials have the largest market capacity and higher add
View More
lithium ion batteries discharge process Points to note when discharging lithium ion batteries: First, the discharge curre
View More
Lithium batteries are divided into lithium ion batteries and lithium ion batteries. Cell phones and laptops use lithium ion
View More
1. IntroductionAlkaline zinc-manganese batteries only began to enter the market after the 1950s. In recent years, in the Chin
View More
The new energy automobile industry is a national strategic emerging industry in my country. With strong policy support and ac
View MoreEnter your email for exclusive offersand information on new upcoming products.
about us
product
service
news
中
